Semi-gloss or satin paints are typically preferred for risers but can prove dangerous when used on the stair treads. Always opt for floor paints when you can, as they’re designed to be non-slip and more durable than other kinds of paints.

Table of Contents

Can you just paint wooden stairs?

You can paint both bare wood and painted wood, but if the stairs are very old and have many layers of paint on, you might want to strip them back first. This can be done using paint stripper, a heat gun or sanding – but take care as old paint may be lead based.

What type of paint do I use for stairs?

The best and most widely used paint for stairs is a Semi-Gloss paint. Semi-gloss paints dry to a harder finish and have enough of a gloss they can be easily cleaned.

When painting stairs What do you paint first?

Start with the white paint on the risers. Next, do the dark paint on the treads. Timing is key here – you’ll need to let the treads dry at least 8 hours between coats. I found that 2 coats covered it well.

Do you need to prime stairs before painting?

Prime. Since the stairs will likely be getting a fair amount of wear, a good primer is key. Paint this on and allow it to dry before you start on your top coat.

👉 For more insights, check out this resource.

Can I paint over old paint on stairs?

Prepare the steps The bonus of a specialist paint nowadays is that it can be painted straight over old paint or varnish, so no need to fear hours of more sanding ahead of you. Once complete, vacuum up any dust and clean with a cleaning solution and cloth.

Does painting stairs make slippery?

Of course, even stairs that have been painted with slip-resistant paint are likely to be more slippery than carpeted stairs, so you should still take care when going up or down them. … Using a large brush, paint each stair tread with the anti-slip paint. Leave the stairs for at least a few hours to give them time to dry.

👉 Discover more in this in-depth guide.

Do you need to seal painted stairs?

After your new paintwork is complete, you need to protect it. I prefer to use clear water-based urethanes for this. The water-based urethanes tend to stay clear for years. Oil-based urethanes had a strong tendency to develop a golden patina.

How do you paint stairs that are already painted?

Priming and Painting Follow the primer application with a light coat of paint; allow the paint to dry for a few hours, or as directed on the paint can, then apply a second light coat. As with cleaning, begin at the top of the staircase and work your way down as you apply primer and paint.

Can you paint stairs without sanding?

To refinish wood stairs without sanding, you need to cover the stair treads with the final touch. … Therefore, you should use painter’s tape to make sure that the paint doesn’t stray from the stair treads. Even if it does, it will be easier for you clean if you have the painter’s tape on.

Article first time published on

Which Colour is best for stairs?

Should I paint my stairs?

Upkeep. While prepping your stairs and using a high-quality floor and porch paint will help keep your stairs looking nice, nicks and general wear and tear are more noticeable than on hardwood and you’ll have to touch them up occasionally.

How do you clean wooden stairs before painting?

Vacuum-clean the entire staircase to get rid of all sanding dust and then wipe it down with a white cotton rag. Next, use a foam brush to apply a coat of varnish to the handrail, risers, and treads. A foam brush works better than paintbrush because it has no bristles and it produces a smooth finish.

Is it better to paint or stain stairs?

Stains are generally more durable than paint, and lighter tread paints may begin showing scuffs and marks before stains or darker paints. Painting over dated, stained wood on spindles, risers, and handrails is one of the most cost-effective ways of transforming your staircase or stairwell.

Can you paint over stained wood?

Yes, you can paint over stained wood. In fact, there are numerous correct ways to paint stained wood and the method you choose should depend on the type of stain used, the state of the wood, and whether or not you’re painting a piece of furniture or some other structure.

What to put on stairs so they are not slippery?

So the question is, how can you make your hardwood stairs safer and less slippery? The best way to make your hardwood stairs less slippery is to add traction by installing carpet, anti-slip adhesive stair treads, or applying a coat of anti-slip floor finish to the surface of each stair.

Should I paint my wooden staircase?

Painting your wooden stairs is a fairly inexpensive and easy way to completely change the look of your staircase! There are lots of different color options, and it can be exciting to try something new. You can give it a timeless, classic look, or go for something more modern and trendy.

Can I use satinwood on stairs?

Very impressed with Dulux Diamond satin on these stairs. You can pick it up from any Dulux Decorating Centre, about a million independent trade paint outlets, or online. … Mage sure you use a good quality adhesion primer if you’re going over an old oil-based coating.

What should I paint my stairs with?

Polyurethane is supposed to protect any painted or stained surface. Plus, it makes it easier for you to wipe down the protected surface in the future.

How do you sand stairs before painting?

  1. Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper. …
  2. Clean. Vacuum between passes, then wipe down the treads with a tack cloth. …
  3. Sand again. …
  4. Clean again. …
  5. Treat the wood. …
  6. Stain the treads. …
  7. Apply the Finish. …
  8. Sand, then repeat two more times.

Can you paint over stained wood without sanding?

Can you paint over stained wood without sanding? If you use the right primer, you don’t have to do any sanding before painting. Some of the items you can paint without sanding include cabinets, furniture, and trim molding. For the best results, though, sanding is recommended.